www.petallmfg.com

Injection Blow Tooling

Home » Product » injection blow tooling

Preform Mold Components:

Die set 1050 Steel, electroless nickeled
Injection Manifold 1050 Steel.
Preform Cavities Stavax Stainless Steel, hardened to 38-42 Rockwell C scale. Polished to a mirror finish.
Neck Molds Stavax Stainless Steel, hardened to 52-54 Rockwell C scale.
Core Rods Stavax Stainless Steel, hardened to 52-54 Rockwell C scale. Polished to a mirror finish.
Face Bars 5061 Aluminum for light weight.


Blow Mold Components:

Die set 1050 Steel, electroless nickeled
Blow Cavities Machined from 7075 T6 Aircraft Grade Aluminum.
Neck Molds Stavax Stainless Steel, hardened to 52-54 Rockwell C Scale.
Bottom Plugs AMPCO 18 bearings, bearings ,Beryllium copper Base. Stainless Steel springs,
Stavax Stainless. Steel Cams hardened
to a 38-42 Rockwell C scale.


Pick-Off Assembly:

Stripper Bar 6061 Aluminum
Stripper Plate 6061 Aluminum


MOLD DESIGN INFORMATION:

  • Molds are individual mold blocks for easy replacement or repair.
  • Blow mold push up may be water cooled and is at the discretion of the mold designer.
  • Tip blow verses shoulder blow is at the discretion of the mold designer
Core Rods fitted to face bar
Core Rods fitted to face bar
Stainless Steel Core Rods
Stainless Steel Core Rods
Polished to mirror finish
6061 Aluminum light weight Face Bar
6061 Aluminum light weight Face Bar
Unit Cavity design with bottom push-up insert
Unit Cavity design with bottom push-up insert
(Large advantage over monoblock design)
Injection Manifold of 1050 steel and pre-form
Injection Manifold of 1050 steel and pre-form
cavities 38-42 Rockwell polished stainless steel
Entire Die Set 1050 steel Electroless nickel Plated
Entire Die Set 1050 steel Electroless nickel Plated


EXAMPLE OF OUR LATEST IBM TOOL DESIGN



Injection Blow Molds

Packing and Transport
Packing and Transport
Finish of the Injection Mold
Finish of the Injection Mold
Mold Guide
Mold Guide
Injection Mold and Manifold
Injection Mold and Manifold

Injection Mold
Injection and Blow Cavities
Injection and Blow Cavities
Blow Cavities
Blow Cavities
Blow Mold
Blow Mold
Blow Mold in Machine
Blow Mold in Machine
Packing System for Core Rods
Packing System for Core Rods
Mold and Transport Method
Mold and Transport Method