Extruder:
| Screw diameter: | 36mm |
| L/D | 22-24 |
| Max shot HDPE: | 125 cm3 |
| Pump: | 15kw |
Clamp:
| Blow clamp tonnages: | 40 KN (4.5 US Tons) |
| Injection clamp tonnages: | 280 KN (31.5 US Tons) |
| Max Daylight: | 120mm |
| Mold stack L x H: | 350 x 280 mm |
| Clamp Min. Dry Cycle: | 4s |
Other:
| Chiller water: | 20 degree, 2bar, 3 m3/h |
| Min air: | 0.3 m3/min, 1 Mpa |
| Machine dimension L x W x H: | 2850 x 1400 x 2220 mm |
| Machine weight: | 3 tons |
Bottle size and number of cavities:
| Bottle Size (ml) | 15 | 20 | 40 | 60 | 100 | 120 | 200 |
| Number of Cavities | 5 | 5 | 4 | 4 | 3 | 3 | 2 |
PRIMARY CONTACT
CONTACT US
ADDRESS:
85 Royal Crest Court Markham, L3R 9X5, Ontario, Canada
TELEPHONE: 905-305-1797
FAX: 905-305-0013
E-MAIL: obrandau@petallmfg.com
Minnesota Location:
620 Minnie Street, Paynesville, MN
56362, USA
(Brazil, Argentina, Uruguay, Paraguay, Bolivia and Chile)
Mr. Waldemar Harms, Mr. Carlos Eduardo
MOBIL: +55 11 98919-6210
TELEPHONE: +55 11 5641-4453
E-MAIL: rshcomercial@gmail.com
Mike Liu
TELEPHONE: 86 139 624 78740
E-MAIL: liulvkuan@163.com
WeChat ID: 13962478740
WILLEVALDO RODRIGUEZ
TELEPHONE: 011-251-333-137-2771
E-MAIL: maquiblow@gmail.com
Have a quick enquiry? Get in touch with us by filling in your details below and we will contact you shortly.
