A range of CANMOLD Long Strokes is available. There are 3 "standard" models and 5 various types for oversize containers up to 30 Litre containers.
The largest multi-cavity configuration on the CANMOLD 250R is 20 cavities (10 each side) with 100 ML/200ML containers.
These machines are state-of-the-art, and include the following:
- Tiebar - less clamping for easy mold change
- ANSI safety for North America available
- CSA/UL/CE electrical package available
- Linear bearing horizontal carriage movement
- Proportional hydraulics on carriage
- Proportional hydraulics on clamp
- Automatic deflash after molding
- Automatic gripper take-out with conveyors
- Post-mold cooling in-line
- In-line, on-board leak testing on each side
- Scrap conveyors below operator platform
- Secondary scrap conveyor into regrind
- 3-layer head available + viewstripe
- IML availability
- Accumulator back-up on all functions for speed
- Complete OSHA safety guarding with interlocks, disabling air, hydraulics, electrical functions
- AB Inverter
- Zambra gearbox (Italy)
The CANMOLD SERIES are ultra-modern machines with barrier flight screw design and mixing head for high output of material. Grooved feed extruder available for even higher output. Bobbing head extruder with linear carriage movement for low energy/high speed. AC or DC motor available (choice). Pre-squeeze knife with pre-blow air available.
STANDARD MODELS AVAILABLE
- CANMOLD 70R
- CANMOLD 150R
- CANMOLD 250R
CANMOLD 70R
CANMOLD 150R
CANMOLD 250R
- CANMOLD 70R can accommodate 2 x 4L (US Gallons) each side for 4 cavities
- CANMOLD 150R can accommodate 2 x 5L each side for 4 cavities
- CANMOLD 250R can accommodate 3 x 5L each side for 6 cavities or a maximum of 10 x 100ML each side for 20 cavities
- MULTIPROCESS CONTROL OPERATION PANEL
- PARISON CONTROL SCREEN
- ELECTRICAL PANEL
- SINGLE HEAD WITH VIEW STRIPE EXTRUDER
- QUADRUPLE HEAD WITH VIEW STRIPE EXTRUDER
- SINGLE STATION MOLD CLAMPING UNIT
- DOUBLE STATION MOLD CLAMPING UNIT
- DOUBLE HEAD DOUBLE STATION MODEL
- HYDRAULIC UNIT
- IN LINE LEAK DETECTOR
- BUILT IN TYPE LEAK DETECTOR
Close up view of main features