DESCRIPTION: 4 standard models represent the most advanced design of equipment to produce clean, contamination free parts which are ideal for the pharmaceutical, medical, food and cosmetic markets. All parts that can leak oil or hydraulic fluids are located below the mold area to avoid mold and container contamination from above.
The CAN MOLD machine has features unavailable from competitors, offering both:
4 standard models are available:
"Please click on the below Data Sheet for more information"
FEATURES:
Components have been specially selected for their commercial availability in North America and Europe. Electrical components are selected to meet SEC 70 North America), CE (European ) and Canadian (Ontario and Quebec) directives.
IBM 300/700 connected load is 88 amps, but average usage is a mere 55 amps. Cost per month in energy is about US $1950, compared with US $4000 from our competitor's equivalent model, which requires a 200 amp connected load. The differential exists across all models.
Mold Size Capabilities (mm) IBM 300/700 Models
Other sizes available on request. Product drawings or a bottle sample will be required for final configuration.
Bottle Measurement
Bottle | Neck "T" mm | Height "H" mm | Diameter O/dia mm | Cavities | Center Distance | |
---|---|---|---|---|---|---|
A | 5 ml | 10 | 35 | 15 | ||
B | 10 ml | 15 | 40 | 20 | 20 | 35 |
C | 20 ml | 15 | 50 | 25 | 18 | 40 |
D | 30 ml | 20 | 60 | 30 | 16 | 42 |
E | 40 ml | 22 | 65 | 35 | 14 | 45 |
F | 60 ml | 28 | 75 | 40 | 13 | 50 |
G | 80 ml | 30 | 80 | 45 | 12 | 55 |
H | 100 ml | 32 | 85 | 50 | 12 | 60 |
I | 150 ml | 35 | 90 | 53 | 10 | 70 |
J | 200 ml | 38 | 100 | 58 | 8 | 85 |
K | 400 ml | 42 | 120 | 65 | 6 | 110 |
L | 650 ml | 50 | 160 | 80 | 5 | 120 |
M | 1000 ml | 40 | 200 | 90 | 4 | 150 |
N | 1500 ml | 45 | 200 | 100 | 3 | 180 |
Superb, bright color monitor covers all aspects of the machine. Below are 2 screen examples
Overview page (Fig. 7-10)
Screw temperature page (Fig. 7-11)
Molds of the very highest quality are provided with the machine or sold as separate items. Tools interchangeable with Jomar and Uniloy IBM equipment are available as standard. Molds are produced in both high quality alloys or stainless steel.
A set of molds is made up as follows: