Semi Automatic Reheat

Home » Product » semi automatic reheat

Semi-Automatic Hand Fed Pre-Form Heater and Reheat Blow Machines

Pet Equipment – Index
2 – Stage Equipment (from Pre-Forms)

Semi-Automatics (2 machines per system)

1. 5 Gallon Model 27 Pet-All (1 US Gallon semi-automatic)
2. 10 Liter Model 10 Pet-All PLC (10L one cavity, 2L two cavity semi-automatic)
3. 7 Liter Model 7 Pet-All PLC (7L one cavity, 2L two cavity semi-automatic)
4. 3 Liter Model 3 Pet-All PLC (3L one cavity, 2L two cavity semi-automatic)
5. Pet-All WM Preheater (For Wide Mouth Containers)


Pet All Manufacturing Inc. Pet Program
Pet Reheat Stretch Biaxial Machinery: 2 Stage From Pre-Forms

Semi-Automatic Equipment (4 sizes available)


Features:

Pet All`s semi-automatic PET blow molders have exceptional features, as follows:

  • Full safety protection shield (retracting) on blow molder
  • Mold adjustment device be separate motor
  • FESTO pneumatics, Omron PLC and controls, automatic lubrication system

Several models are available. In all cases 2 machines are necessary. One to heat the pre-form and one to blow the PET pre-form into a finished container. Full support equipment available for a complete plant.

1. 5 Gallon Model 27 Pet-All (1 US Gallon to 5+ US Gallon)

  • Volume in liters of product    1 US Gallon up to 27 Litres (3.8 to 27L)
  • Output                                  To 100 per hour
  • Neck of product                    To 100 mm (Max)
  • Mold platen                           420x640 mm
  • Mold Thickness                     400 mm
  • Mold stroke                           330 mm
  • Clamp force                          100KN
  • Operator Protection shield (retracting) on blow molder

Blow Molder: 2.75 x 0.68 x 2.1 meters (size). Weight 2100 kgs.

Pre-heater: 2.2 x 0.75 x 1.9 meters (size). Weight 560 kgs.

On request, will be supplied with all ancillary equipment:

  • PLC controlled equipment
  • Volume of product size      To 10 Liter
  • Output                               To 350 per hour
  • Neck of Product                 To 75 mm (max)
  • Mold platen                        360 x 500 mm
  • Mold thickness                   300 mm (max) 170 mm (min)
  • Mold stroke                        230 mm
  • Clamp force                       80 KN
  • Operator Protection shield (retracting) on blow molder.


Blow Molder: 1.6 x 0.58 x 1.8 meters (size). Weight 800 kgs.

Pre-heater: 1.5 x 0.7 x 1.35 meters (size). Weight 380 kgs.

2. 10 Liter Model 10 Pet-All PLC (10 Liter in 1 cavity)


  • PLC controlled equipment
  • Volume of product size      To 10 Liter
  • Output                               To 350 per hour
  • Neck of Product                 To 75 mm (max)
  • Mold platen                        360 x 500 mm
  • Mold thickness                   300 mm (max) 170 mm (min)
  • Mold stroke                        230 mm
  • Clamp force                       80 KN
  • Operator Protection shield (retracting) on blow molder.

Blow Molder: 1.6 x 0.58 x 1.8 meters (size). Weight 800 kgs.

Pre-heater: 1.5 x 0.7 x 1.35 meters (size). Weight 380 kgs.


Ancillary Equipment
Full set available: High / Low Compressors (2), Air Filter (1), Voltage Regulator (1)

3. 7 Liter Model 7 Pet-All PLC (7 Liter in 1 cavity, 2 Liter in 2 cavity)

  • PLC controlled equipment
  • Volume of product size            To 7 Liter (1 cavity) 2 Liter (2 cavity)
  • Output                                     350 per hour 7L, 840 per hour 2L (max)
  • Neck of product                       To 75 mm
  • Mold thickness                         280 mm (max) 170 mm (min)
  • Mold Stroke                             210 mm
  • Clamp force                             80 KN
  • Operator Protection Shield (retracting) on blow molder.

Blow Molder: 1.83 x 0.58 x 1.8 meters (size). Weight 800 kgs.

Pre-heater: 1.5 x 0.7 x 1.4 meters (size). Weight 380 kgs.


Ancillary Equipment Full set available: High/Low Compressors (2), Air Filter (1), Voltage Regulator (1)

4. 3 Liter Model 3 Pet-All PLC (3 Liter in 1 cavity, 2 Liter in 2 cavity)

  • PLC controlled equipment
  • Volume of product size          3 Liter in 1 cavity, 2 Liter in 2 cavity
  • Output                                   350 per hour 3L, 840 per hour 2L
  • Neck of product                     To 75 mm
  • Mold platen                            360 x 500 mm
  • Mold Thickness                      200 mm (max) 120 mm (min)
  • Mold stroke                           140 mm
  • Clamp force                           60 KN
  • Operator Protection Shield (retracting) on blow molder

Blow Molder: 1.53 x 0.58 x 1.75 meters (size). Weight 690 kgs.

Pre-heater: 1.35 x 0.5 x 1.2 meters (size). Weight 280 kgs


Ancillary Equipment Full set available: High/Low Compressors (2), Air Filter (1), Voltage Regulator (1)

5. Pet-All Wide Mouth Preheater

Special for Wide Necks (Wide Mouth Containers)
A special preheater is available for wide mouth containers, with 12 rotation device widely spaced.