Extrusion Blow Mold >> Long Stroke Series

A range of CANMOLD Long Strokes is available. There are 3 "standard" models and 5 various types for oversize containers up to 30 Litre containers.

The largest multi-cavity configuration on the CANMOLD 250R is 20 cavities (10 each side) with 100 ML/200ML containers.

These machines are state-of-the-art, and include the following:

  • Tiebar - less clamping for easy mold change
  • ANSI safety for North America available
  • CSA/UL/CE electrical package available
  • Linear bearing horizontal carriage movement
  • Proportional hydraulics on carriage
  • Proportional hydraulics on clamp
  • Automatic deflash after molding
  • Automatic gripper take-out with conveyors
  • Post-mold cooling in-line
  • In-line, on-board leak testing on each side
  • Scrap conveyors below operator platform
  • Secondary scrap conveyor into regrind
  • 3-layer head available + viewstripe
  • IML availability
  • Accumulator back-up on all functions for speed
  • Complete OSHA safety guarding with interlocks, disabling air, hydraulics, electrical functions
  • AB Inverter
  • Zambra gearbox (Italy)

The CANMOLD SERIES are ultra-modern machines with barrier flight screw design and mixing head for high output of material. Grooved feed extruder available for even higher output. Bobbing head extruder with linear carriage movement for low energy/high speed. AC or DC motor available (choice). Pre-squeeze knife with pre-blow air available.

STANDARD MODELS AVAILABLE

  1. CANMOLD 70R
  2. CANMOLD 150R
  3. CANMOLD 250R

???
CANMOLD 70R ? ??? CANMOLD 150R

Long Stroke

CANMOLD 250R

  • CANMOLD 70R can accommodate 2 x 4L (US Gallons) each side for 4 cavities
  • CANMOLD 150R can accommodate 2 x 5L each side for 4 cavities
  • CANMOLD 250R can accommodate 3 x 5L each side for 6 cavities or a maximum of 10 x 100ML each side for 20 cavities
  1. MULTIPROCESS CONTROL OPERATION PANEL
  2. PARISON CONTROL SCREEN
  3. ELECTRICAL PANEL
  4. SINGLE HEAD WITH VIEW STRIPE EXTRUDER
  5. QUADRUPLE HEAD WITH VIEW STRIPE EXTRUDER
  6. SINGLE STATION MOLD CLAMPING UNIT
  7. DOUBLE STATION MOLD CLAMPING UNIT
  8. DOUBLE HEAD DOUBLE STATION MODEL
  9. HYDRAULIC UNIT
  10. IN LINE LEAK DETECTOR
  11. BUILT IN TYPE LEAK DETECTOR

Close up view of main features

LS4 ?LS5

LS4 ?LS7

LS4 ?LS7

LS4 ?LS7

LS4 ?LS7

LS4


Canadian Head Office:

ADDRESS:
85 Royal Crest Court Markham, Ontario
L3R 9X5
Canada

TELEPHONE:
905-305-1797

FAX:
905-305-0013

E-MAIL:
cmerrick@petallmfg.com


Western USA Business Center:

Arizona Location:
407 S 107th Ave unit A-10
Tolleson, AZ 85353

TELEPHONE:
905-305-1797

E-MAIL:
cmerrick@petallmfg.com


China Centre:

TELEPHONE:
86-1360-808-8755

E-MAIL: tian@petallmfg.com


OFICINA AMERICA LATINA:

TELEPHONE:
54 11 5368 0452

E-MAIL: jpalao@petallmfg.com


OFICINA BRAZIL:

DIRECT CELL:
55 11 9739 86529

TELEPHONE:
55 11 3522 5280

E-MAIL: jorge.palao@emtsa.net


MEXICO CENTER:

TELEPHONE:
011-521-553-576-3992

E-MAIL: fernando.mitre@hotmail.com


UK Hotline:

Lyn Merrick

TELEPHONE:
078 4026 9935

E-MAIL: lmerrick@petallmfg.com

Chumpower Stretch Blow | PET Rotary | PP Stretch Blow Molding Machine | PET Stretch Blow Moulding Machine | Long Stroke Series | Budget Series | Special Industrial Machines | Grinders/Granulators | Water Chillers | Dosing Mixer | Spin Trimmers | Preform Injection Molding | Pet Tooling | Non Inverted Head Machines | Non Inverted Head Machines | Non Inverted Head Machines