PRIMARY CONTACTS


Canadian Head
Office:


ADDRESS:
85 Royal Crest Court
Markham, Ontario
L3R 9X5
Canada

TELEPHONE:
905-305-1797

FAX:
905-305-0013

E-MAIL:


Usa Engineering
Centre:

ADDRESS:
Pet All USA Inc.
971 Division Street
Adrian, Michigan
49221
USA

TELEPHONE:
1-905-305-1797

E-MAIL


China
Centre:

TELEPHONE:
86-1360-808-8755

Email:

 

Mexico / Brazil
Centre:


TELEPHONE:
011-521-553-576-3992

Email:


United Kingdom
Centre:

TELEPHONE:
44-161-763-4000

Email:

 

CONTACTS US

 

Products >> IBM (Injection Blow Mold)

Inverted Head Non - Inverted Head
IL-VS (Vision & Leak) Injection Blow Tooling
IBM Complete Production Cell All Electric IBM Machines
(A)Non Inverted Head Machines

NEXION´┐Ż IBM INJECTION BLOW MOLD MACHINERY

Pet All Manufacturing Inc. offers a range of injection blow molding machines suitable for the range of bottles shown below. These are supplied under the Can Mold Nexion range, and 3 standard models are available:

(B)Inverted Head Machines

Not only are the injection blow molding machines available, but also IBM tooling to offer a full technical service.

The equipment has been specially designed for Pet All Manufacturing Inc., and all machines for the North American market are tested and approved at our engineering centre before release to customers.

  • Model 250/450 (50 Ton)
  • Model 300/700 (78.6 Ton)
  • Model 700/1200 (135 Ton)
  • Model 700 / 1600 (189 Ton)
The Can Mold Inverted Head (upside down hydraulics) brand machines have the following outstanding features:
  • Heavy duty solid construction
  • Oil-free components in the sector above the take-off conveyor giving added suitability for use in pharmaceutical and delicate cosmetic containers
  • Screw and barrel composition: The screw is made of high quality 38 CrMoA1A material and is hard plated to 40Cr. The barrel is made of high quality bearing steel and is spray welded with hard alloy.
  • The lifting movement of the rotary table is accomplished by mechanical table lift on Models 125/25 and 160/45. On the largest 250/60 model the turntable movement is produced by a bottom mounted hydraulic cylinder.
  • The machines come complete with all-round security guarding which is not shown in the photographs, and meet OSHA specifications.
  1. Oil Pump Vickers & Parker Denison (USA)
  2. Hydraulic valves Vickers (USA)
  3. Pneumatic valves Festo (Germany)
  4. Control computer Mitsubishi & Omron (Japan)
  5. Switch Omron (Japan)
  6. Transducers Gefran (Italy)
  7. Displays Allen Bradley (USA)
  8. Low-tension wiring Schneider (France)
  9. Oil motor Intermot (Italy)
  10. Electromotor Bijie (China)
  11. Mold temperature control Shini (China)
  12. Screw and barrel Jinyou (China)
  13. Working table Cast Iron
 
PetAll
|         
Website Design and Developed by Sonitek International  
PetAll
Chumpower Stretch Blow | PET Rotary | PP Stretch Blow Molding Machine | PET Stretch Blow Moulding Machine | Long Stroke Series | Budget Series | Special Industrial Machines | Grinders/Granulators | Water Chillers | Dosing Mixer | Spin Trimmers | Preform Injection Molding | Pet Tooling | Non Inverted Head Machines | Non Inverted Head Machines | Non Inverted Head Machines
Apycom jQuery Menus