|
|
|
|
| |
|
| |
|
An excellent choice for PET Blow Molding machines requiring high air volume at high pressure the Pet All, Pet Star system uses totally frame supported modular add-on units that can be progressively mounted as requirements increase. A computerized control system manages the interface. |
| |
| Two stage non lube high pressure air compressor specially designed for PET blow moulding machines |
 |
- Lubricating oil splash system in crank case is
prevented from reaching the blow air compo-
nents
- Blow air components feature thermally stable
Anti-friction parts guaranteeing long service
life
- With special design the air pressure will stop
the lubrication oil getting into air compressing
body, so the output high pressure air is clean
without any oil.
- An automatic unload system ensures that the
system starts safely without residual pressure.
- This feature protects both frame and motor
and so extends the working life of all compo-
nents.
- Heavy-duty design for 24/7 operation
|
|
| |
| Three stage high pressure air compressor specially designed for PET blow moulding machines |
 |
- The compressor can remove waste
and dirt automatically by after
cooling system. High-quality air
output due to economical dirt
removal system in 3 stages.
- The compressor is equipped with
a special, highly effective air cool-
ing chiller of advanced design.
- Market leader "Herbiger" main air
valve with large capacity. Its high
efficiency characteristic ensures
the stable running of the com-
pressor.
|
|
| |
| PLC |
 |
- Star Delta Start
- Automatic Drain (timing/machine stop}
- Automatically adjust quantity of working units according to the actual air demand
- Target pressure, pressure difference interval of units Start-up time, unit work cycle, alarm pressure unit working sequence etc. Parameters can be reset
according to the actual situation
- Liquid crystal display
- Displays current pressure, unit work status and unit
error status
- Units start/stop in sequence.
- Manual or automatic control, independent of each
Other
|
|
| |
Booster compressor specially designed for
PET blow moulding machines
Booster Applications
Compressed air systems in industrial and commercial facilities are generally designed for pressures of 90 to 100 psig. However, some special applications such as moulding, printing & leak testing require higher pressures.
PET-All PETStar Booster Compressors increase air system pressure to a working pressure of 580 psig & to a maximum of 650 psig. These reliable units are compact, quiet & offer an economical alternative to designing the main compressed air system for high pressure. How you simply install a PET-All PETStar Booster Compressor to increase the pressure of the existing compressed air where it is needed.
Booster Operation
 Compressed air from the main air system is piped to the booster.
Using precompressed air is more economical than starting with ambi-
ent air. With high volumetric efficiency, the booster compresses to the
desired pressure.
This single-stage system is ideal and economical for
many applications when only a moderate amount of high pressure
plant air is required.
PET-All PEf5tar has the technology and the ability to design a com-
pressed air system suited specifically to your application |
| |
| Screw Compressor |
 |
- Fully automatic load & unload. Compressor will start automatically & shutdown under
the following conditions:
- When the target pressure in the air tank has been reached
- When the voltage drops below a threshold
- In an over-pressure condition
- When the temperature reaches a protection setpoint
- High-quality European technology and components (GHH-Rand and SKF)
- M-H air filter with long-life capability. (4,000 hours+), it is easy for Maintenance and replace-
ment
- M-H oil filter, filtration density 10 micron (99.9% efficiency) and long-life capability (4,000 hours+)
- M-H air-oil separator, particle count below 3 ppm.
- Contro1 system: All parts are from Schneider in France.
|
|
| |
| |
| "Please click on the below brochure FOR MORE INFORMATION" |
| |
 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
