PRIMARY CONTACTS



Canadian Head
Office:


ADDRESS:
85 Royal Crest Court
Markham, Ontario
L3R 9X5
Canada

TELEPHONE:
905-305-1797

FAX:
905-305-0013

E-MAIL:



Western USA Business Center:

Arizona Location:
407 S 107th Ave unit A-10
Tolleson, AZ 85353

TELEPHONE:
480-236-9785

E-MAIL



China Centre:

TELEPHONE:
86-1360-808-8755

Email:

 

 
Mexico / Brazil
Centre:

TELEPHONE:
011-521-553-576-3992

Email:


United Kingdom
Centre:

TELEPHONE:
44-161-763-4000

Email:

 

CONTACTS US

 

Products>>Accumulator Head

 
 
VIDEO - "Can Mold Accumulator Head"

 
 

Standard Range - Accumulator Head

  • Typical accumulator head applications
  • Car duct parts
  • Polycarbonate parts including 5 gal water bottles
  • Fluid container holders including 6 - layers
  • Tool boxes
  • Industrial drums
  • IBCs
       
     
 
Model # Screw ø Through - put Clamping Force Shot Capacity (Acc. Vol.) Largest Part Size Platen Size (W x H)
mm KG/H KN L L mm
AH75 75 90 190 3.5 20 720 X 600
AH82Z 82 45 160 1.85 20 720 X 600
AH90/A 90 120 245 5.5 50 880 X 800
AH90/B 90 150 245 5.5 50 880 X 800
AH100/A 100 140 490 12 120 1020 X 1060
AH100/B 100 180 490 12 120 1020 X 1060
 
 
Model # Screw ø Through - put Clamping Force Shot Capacity (Acc. Vol.) Largest Part Size Platen Size (W x H)
mm KG/H KN L L mm
AH 350-90 90 180 350 8 60 950 X 900
AH 550-100 100 270 550 12 120 1100 X 1100
AH 750-120 120 400 750 20 220 1300 X 1400
FT 1500 120 X 2 New oversized format two screw operation.


The CanMold accumulator head series is made for Pet All Manufacturing Inc. and finished for North American/European markets at our own workshops. Several thousand accumulator head machines have been produced successfully for over 30 years, at an ISO 9001 facility.
 
 

Index of Special Applications - Accumulator Head

    FT 1500
  • Platen Dimensions: 1800 x 1600 mm
  • Clamp Force: 1500 Kn
  • PLC: B + R
  • Screw: 2 x 120 mm
  • Plasticisation: 2 x 350 Kg Hour
 
 
 
    IBC 1500
  • Platen Dimension: 1800 x 1600 mm
  • Clamp Force: 1500 Kw
  • PLC: B + R
  • Screw: 2 x 120 mm
  • Plasticisation: 2 x 420 Kg Hour
 
 
 
    AH 82Z - (PC Model for Polycarbonate)
  • Platen Dimensions: 440 x 600
  • Clamp Force: 210 Kw
  • PLC: B + R
  • Screw: 82 mm
  • Plasticisation: 90 Kg Hour
 
 
    AH 650 / III
  • Platen Dimensions 530 x 530 mm
 
 
 
 
 
    AH 90 (Seats)
  • 900 x 800 mm Platen
  • 90 mm Screw
  • 150 Kg / Hour Output
 
    AH 100 (Seats)
  • 1050 x 1000 mm Platen
  • 100 mm Screw
  • 180 Kg Hour Output
 
    AH 50 (Seats)
  • 940 x 870 Platen
  • 90 mm Screw
  • 90 Kg Hour Output
 
 
 
 
 
    AH 90 (Tool Cases)
  • 900 x 800 mm Platen
  • 90 mm Screw
  • 150 Kg Hour Output
 
    AH100 (Tool Cases)
  • 1050 x 1000 mm Platen
  • 100 mm Screw
  • 180 Kg Hour Output
 
 
 
 
    AH Special 3D Air Duct
  • Platen Dimensions: 1050 x 1000 mm
  • Clamp Force: 500 Kn
  • PLC: B + R
  • Extruder Range: of 55, 65, 75 and 90 mm
  • Plasticisation Output (kg): 50, 60, 90 and 120 Kg Hour for above Extruders
 
 
 
 
  • Volume under 10000 L
  • Volume under 2000 L
  • Volume in Range 250 to 500 L
 
 
*These machine dimensions are totally flexible and the following are examples only.
    BK 10,000
  • Max Volume: 10,000 L
  • Screw: 4 x 120 mm
  • Mold Dimensions: 4500 x 4500 mm
  • Clamp Force: 6000 Kn
    BK 5000
  • Max Volume: 5000 L
  • Screw: 2 x 160 mm
  • Mold Dimension: (request)
  • Clamp Force: 4000 Kn
    AH 3000 – 10,000 BK Series

    BK 3000
  • Max Volume: 3000 L
  • Screw: 2 x 150 mm
  • Mold Dimension: 2800 x 3000 mm
  • Clamp Force: 3000Kn
      
 
 
 
  • Double Layer - Full Range
  • Triple Layer - Full Range

Machine AH (F2) DL

Double layer

 
    AH (F2) DL (Double Layer)
  • 5 different sizes available: 190, 240, 500, 750, 1500 Kn
  • Mold Dimensions: 750 x 650, 900 x 800, 1050 x 1000, 1300 x 1400, 1800 x 1600
 
 
Triple Layer
  • Same machine specifications as Double Layer (5 Models)
  • Traditionally 25% outer layer, 50% middle, 25% Inner layer
Normally double colors are produced on our special AH100A Series, with special model AH 100 Z / A
  • Machine Volume: 120 L
  • Screws: 2 x 75 mm
  • Output: 180 Kg Hour
  • Platen Dimension: 1050 x 1000 mm
  • Clamp: 550 Kn
 
 
There is a special machine for flat panel products with high molecular weight. Products include wall panels, door panels, sea floats, highway barriers, desktop panels and hospital beds.
 
 
Model AH 150TB
  • PLC: Panasonic or B + R
  • Volume Products: 2100 x 1000 x 120 mm
  • Screw Diameter: 120 mm
  • Plasticisation Capacity: 450 Kg / Hour
  • Mold Platen Size: 1900 x 1500 mm
  • Clamp Force: 1500 Kn
PetAll
|         
Website Design and Developed by Sonitek International  
PetAll
Chumpower Stretch Blow | PET Rotary | PP Stretch Blow Molding Machine | PET Stretch Blow Moulding Machine | Long Stroke Series | Budget Series | Special Industrial Machines | Grinders/Granulators | Water Chillers | Dosing Mixer | Spin Trimmers | Preform Injection Molding | Pet Tooling | Non Inverted Head Machines | Non Inverted Head Machines | Non Inverted Head Machines
Apycom jQuery Menus